← Back to Dayton Audio - 500W DSP Plate Amplifier - SPA500DSP
Where the figures for SPA500DSP come from
We take every figure from Dayton Audio's own product page or datasheet where we can. This lists where each figure on the SPA500DSP page came from.
- 3 from Dayton Audio's product page
- 16 not yet checked
Power output
| Into 4 Ω |
500 W |
Our earlier listing, not yet checked |
| Minimum load |
4 Ω (assumed: Dayton Audio doesn't state one) |
Our earlier listing, not yet checked |
| Amplifier class |
D |
Our earlier listing, not yet checked |
Controls and processing
| DSP |
Yes |
Our earlier listing, not yet checked |
| DSP functions |
Low-pass, subsonic filter, 5-band PEQ (PC software), 2 PEQ bands on the panel, limiter, high-pass on the line out, delay on the line out |
Our earlier listing, not yet checked |
| Low-pass filter |
30 – 125 Hz |
Our earlier listing, not yet checked |
| Low-pass slope |
12 or 24 dB/octave, or off |
Our earlier listing, not yet checked |
| Subsonic filter |
25 – 40 Hz |
Our earlier listing, not yet checked |
| Subsonic slope |
12 or 24 dB/octave, or off |
Our earlier listing, not yet checked |
| Phase |
Variable, 0–180° |
Our earlier listing, not yet checked |
| Parametric EQ |
5 bands: 10–200 Hz (PC software); 2 on the panel |
Maker's product page |
| High-pass on the line out |
30 – 125 Hz |
Maker's product page |
| Line-out delay |
0 – 10 ms |
Maker's product page |
Inputs and outputs
| Inputs |
RCA line in, L/R (unbalanced); XLR in, L/R (balanced) |
Our earlier listing, not yet checked |
Size and mounting
| Plate (W × H) |
184 × 262 mm |
Our earlier listing, not yet checked |
| Cutout (W × H) |
158.8 × 234.9 mm |
Our earlier listing, not yet checked |
| Weight |
1.1 kg |
Our earlier listing, not yet checked |
Power supply
| Mains |
230–240 V AC |
Our earlier listing, not yet checked |
Performance
| Signal-to-noise ratio (A-weighted) |
98.4 dB |
Our earlier listing, not yet checked |
Not on file: Fs, Qts, Vas, Sd, Xmax, Re, Le, Bl, Mms, Sensitivity, Outside diameter, Cutout, Mounting depth, Bolt circle, Flange thickness, Weight. Either the maker doesn't publish it or we haven't found it yet.
What the labels mean
- Maker's product page: copied from the maker's product page.
- Our earlier listing, not yet checked: from the listing we had before we started checking figures against makers. Treat it as a guide until it's checked.
