← Back to Dayton Audio - 130x95mm AMT Tweeter - AMT3-4

Where the figures for AMT3-4 come from

I take every figure from Dayton Audio's own product page or datasheet where I can. This lists where each figure on the AMT3-4 page came from.

• 12 from Dayton Audio's product page
• 2 from Dayton Audio's datasheet
• 3 not yet checked
• 3 from NB Audio's listing

General

Driver type	Tweeter	NB Audio's listing
Nominal size	3.7x5.1"	NB Audio's listing
Nominal impedance	4Ω	Maker's product page
Series	AMT	NB Audio's listing
Power handling (RMS)	25 W	Maker's product page
Power handling (program)	50 W	Maker's product page
Sensitivity	93 dB	Maker's product page
Frequency range	1,900 – 40,000 Hz	Maker's product page

Thiele/Small parameters

Resonant frequency (Fs)	1,900 Hz	My earlier listing, not yet checked
DC resistance (Re)	3 Ω	Maker's product page
Mechanical Q (Qms)	6.26	My earlier listing, not yet checked
Total Q (Qts)	6.15	My earlier listing, not yet checked
Effective piston area (Sd)	32.5 cm²	Maker's product page

Mounting

Faceplate	Rectangle, 95 × 130 mm, corner radius 6 mm	Maker's datasheet
Cutout	68 × 113 mm	Maker's datasheet
Mounting depth	26.5 mm	Maker's product page
Weight	0.6577 kg	Maker's product page
Mounting holes	4	Maker's product page

Materials

Cone	Kapton	Maker's product page
Magnet	Neodymium	Maker's product page

Not on file: Vas, Xmax, Le, Bl, Mms, Outside diameter, Bolt circle, Flange thickness. Either the maker doesn't publish it or I haven't found it yet.

What the labels mean

• Maker's product page: copied from the maker's product page.
• Maker's datasheet: read off the maker's own datasheet or drawing.
• My earlier listing, not yet checked: from the listing I had before I started checking figures against makers. Treat it as a guide until it's checked.
• NB Audio's listing: how I've filed it in the store.

Check them yourself: Dayton Audio AMT3-4 Specification Sheet