← Back to Dayton Audio - 2½" DMA Passive Radiator - DMA70-PR
Where the figures for DMA70-PR come from
I take every figure from Dayton Audio's own product page or datasheet where I can. This lists where each figure on the DMA70-PR page came from.
- 11 from Dayton Audio's product page
- 1 from Dayton Audio's datasheet
- 1 worked out from Dayton Audio's figures
- 2 my estimate
- 3 from NB Audio's listing
General
| Driver type |
Passive Radiator |
NB Audio's listing |
| Nominal size |
2.5" |
NB Audio's listing |
| Series |
DMA |
NB Audio's listing |
Thiele/Small parameters
| Resonant frequency (Fs) |
34.5 Hz |
Maker's product page |
| Mechanical Q (Qms) |
3.86 |
Maker's product page |
| Equivalent volume (Vas) |
1.32 L |
Maker's product page |
| Compliance (Cms) |
1.77 mm/N |
Maker's product page |
| Moving mass (Mms) |
12 g |
Maker's product page |
| Mechanical resistance (Rms) |
0.67 kg/s |
Maker's product page |
| Effective piston area (Sd) |
22.9 cm² |
Maker's product page |
| Linear excursion (Xmax, one-way) |
7 mm |
Maker's product page |
| Displacement volume (Vd) |
16.03 cm³ |
Worked out from the maker's figures |
Mounting
| Faceplate |
Square, 70 × 70 mm |
Maker's datasheet |
| Cutout diameter (suggested) |
≈ 65.0 mm |
My estimate, from the maker's drawing |
| Mounting depth (estimate) |
≈ 43.3 mm |
My estimate, from the maker's drawing |
| Weight |
0.09072 kg |
Maker's product page |
Materials
| Cone |
Aluminium |
Maker's product page |
| Surround |
Rubber |
Maker's product page |
Not on file: Qts, Re, Le, Bl, Sensitivity, Outside diameter, Bolt circle, Flange thickness. Either the maker doesn't publish it or I haven't found it yet.
What the labels mean
- Maker's product page: copied from the maker's product page.
- Maker's datasheet: read off the maker's own datasheet or drawing.
- Worked out from the maker's figures: Vd = Sd × Xmax, EBP = Fs ÷ Qes.
- My estimate, from the maker's drawing: measured off the maker's drawing, usually within ±0.3 mm (up to ±0.5). The suggested cutout is the basket's width on the drawing plus 1 mm of clearance (1.5 mm on drivers over 200 mm). Measure before you cut.
- NB Audio's listing: how I've filed it in the store.
Check them yourself: Dayton Audio DMA70-PR Specification Sheet