← Back to Dayton Audio - 50W 100MM Bass Shaker - BST-1
Where the figures for BST-1 come from
I take every figure from Dayton Audio's own product page or datasheet where I can. This lists where each figure on the BST-1 page came from.
- 4 from Dayton Audio's product page
- 1 from Dayton Audio's datasheet
- 3 not yet checked
- 2 from NB Audio's listing
General
| Driver type |
Bass Shaker |
NB Audio's listing |
| Nominal impedance |
4Ω |
Maker's product page |
| Series |
Tactile |
NB Audio's listing |
| Power handling (RMS) |
50 W |
Maker's product page |
| Frequency range |
10 – 80 Hz |
Maker's product page |
| Size |
5.7" |
My earlier listing, not yet checked |
Thiele/Small parameters
| Resonant frequency (Fs) |
30 Hz |
Maker's product page |
Mounting
| Overall diameter |
147 mm |
My earlier listing, not yet checked |
| Mounting depth |
61 mm |
Maker's datasheet |
| Dimensions |
56 × 147 mm Ø |
My earlier listing, not yet checked |
Not on file: Qts, Vas, Sd, Xmax, Re, Le, Bl, Mms, Sensitivity, Cutout, Bolt circle, Flange thickness, Weight. Either the maker doesn't publish it or I haven't found it yet.
What the labels mean
- Maker's product page: copied from the maker's product page.
- Maker's datasheet: read off the maker's own datasheet or drawing.
- My earlier listing, not yet checked: from the listing I had before I started checking figures against makers. Treat it as a guide until it's checked.
- NB Audio's listing: how I've filed it in the store.
Check them yourself: Dayton Audio BST-1 Specification Sheet
