← Back to Dayton Audio - 800W DSP PA Plate Amplifier - PPA800DSP
Where the figures for PPA800DSP come from
We take every figure from Dayton Audio's own product page or datasheet where we can. This lists where each figure on the PPA800DSP page came from.
- 2 from Dayton Audio's product page
- 18 not yet checked
Power output
| Low-frequency output into 4 Ω |
600 W |
Our earlier listing, not yet checked |
| High-frequency output into 4 Ω |
200 W |
Our earlier listing, not yet checked |
| Minimum load |
4 Ω (assumed: Dayton Audio doesn't state one) |
Our earlier listing, not yet checked |
| Amplifier channels |
2 |
Our earlier listing, not yet checked |
| Ways |
2 |
Our earlier listing, not yet checked |
| Amplifier class |
D |
Our earlier listing, not yet checked |
Controls and processing
| DSP |
Yes |
Our earlier listing, not yet checked |
| DSP functions |
High- and low-pass on each output, 6-band PEQ on each output, limiter, delay, 5 presets |
Our earlier listing, not yet checked |
| Phase |
0° or 180° (switch) |
Our earlier listing, not yet checked |
| Parametric EQ |
6 bands per output, 5 presets (PC software) |
Maker's product page |
| High output |
Fixed passive 1 kHz high-pass |
Maker's product page |
Inputs and outputs
| Inputs |
XLR or 6.35 mm (1/4 in) ×2; Bluetooth 5.0; USB-B (PC control) |
Our earlier listing, not yet checked |
| Outputs |
XLR line out; high-pass speaker output; low-pass speaker output |
Our earlier listing, not yet checked |
Size and mounting
| Plate (W × H) |
381 × 160.3 mm |
Our earlier listing, not yet checked |
| Overall depth |
69.8 mm |
Our earlier listing, not yet checked |
| Cutout (W × H) |
355.6 × 139.7 mm |
Our earlier listing, not yet checked |
| Mounting screws |
In the box, with mounting foam |
Our earlier listing, not yet checked |
| Weight |
2.27 kg |
Our earlier listing, not yet checked |
Power supply
| Mains |
120–240 V AC, auto-sensing |
Our earlier listing, not yet checked |
Performance
| THD at rated power |
1 % |
Our earlier listing, not yet checked |
Not on file: Fs, Qts, Vas, Sd, Xmax, Re, Le, Bl, Mms, Sensitivity, Outside diameter, Cutout, Mounting depth, Bolt circle, Flange thickness, Weight. Either the maker doesn't publish it or we haven't found it yet.
What the labels mean
- Maker's product page: copied from the maker's product page.
- Our earlier listing, not yet checked: from the listing we had before we started checking figures against makers. Treat it as a guide until it's checked.
