← Back to Hypex FusionAmp - 1 Way Plate Amplifier - FA251

Where the figures for FA251 come from

I take every figure from Hypex's own product page or datasheet where I can. This lists where each figure on the FA251 page came from.

  • 6 from Hypex's product page
  • 20 not yet checked

Power output

Into 2 Ω 180 W My earlier listing, not yet checked
Into 4 Ω 250 W My earlier listing, not yet checked
Into 8 Ω 130 W My earlier listing, not yet checked
Minimum load 2 Ω My earlier listing, not yet checked
Amplifier channels 1 My earlier listing, not yet checked
Amplifier class D My earlier listing, not yet checked
Amplifier module Hypex NC250MP Maker's product page
Amplifier technology Hypex NCORE Maker's product page
Continuous power per channel (25 °C) 50 W Maker's product page
Configuration 1 channel / 1-way Maker's product page

Controls and processing

DSP Yes My earlier listing, not yet checked
DSP functions 15 biquads per channel (Hypex Filter Design), delay up to 19.2 ms per channel My earlier listing, not yet checked

Inputs and outputs

Inputs XLR (balanced analogue); RCA (unbalanced analogue); high-level (speaker) input My earlier listing, not yet checked
Outputs XLR through (daisy chain) My earlier listing, not yet checked

Size and mounting

Plate (W × H) 280 × 120 mm My earlier listing, not yet checked
Overall depth 55 mm My earlier listing, not yet checked
Cutout (W × H) 256 × 96 mm My earlier listing, not yet checked
Plate thickness 2.5 mm My earlier listing, not yet checked
Plate corner radius 3 mm My earlier listing, not yet checked
Mounting holes 8 × Ø4.5 mm My earlier listing, not yet checked
Mounting screws 8 or 10; Hypex's set of 10 self-tapping 4.3 × 25.4 mm screws is sold separately My earlier listing, not yet checked
Weight 0.725 kg My earlier listing, not yet checked
Back Not airtight: fit it in its own compartment inside the cabinet Maker's product page
Maximum ambient temperature 35 °C Maker's product page

Power supply

Mains 100–120 / 200–240 V AC ±10%, switches automatically My earlier listing, not yet checked

Performance

THD at rated power 1 % into 2 Ω; < 0.1 % into 4 Ω My earlier listing, not yet checked

Not on file: Fs, Qts, Vas, Sd, Xmax, Re, Le, Bl, Mms, Sensitivity, Outside diameter, Cutout, Mounting depth, Bolt circle, Flange thickness, Weight. Either the maker doesn't publish it or I haven't found it yet.

What the labels mean

  • Maker's product page: copied from the maker's product page.
  • My earlier listing, not yet checked: from the listing I had before I started checking figures against makers. Treat it as a guide until it's checked.