← Back to SB Acoustics - 1 1/4" Satori TeXtreme Dome Tweeter - TW29TXN-B
Where the figures for TW29TXN-B come from
I take every figure from SB Acoustics' own product page or datasheet where I can. This lists where each figure on the TW29TXN-B page came from.
- 21 from SB Acoustics' product page
- 6 from SB Acoustics' datasheet
- 4 worked out from SB Acoustics' figures
- 1 my estimate
- 3 from NB Audio's listing
General
| Driver type | Tweeter | NB Audio's listing |
|---|---|---|
| Nominal size | 1.25" | NB Audio's listing |
| Nominal impedance | 4Ω | Maker's product page |
| Series | Satori | NB Audio's listing |
| Power handling (RMS) | 80 W | Maker's product page |
| Sensitivity | 96 dB | Maker's product page |
Thiele/Small parameters
| Resonant frequency (Fs) | 650 Hz | Maker's product page |
|---|---|---|
| DC resistance (Re) | 3 Ω | Maker's product page |
| Voice coil inductance (Le) | 0.02 mH | Maker's product page |
| Mechanical Q (Qms) | 1.62 | Maker's product page |
| Electrical Q (Qes) | 0.65 | Maker's product page |
| Total Q (Qts) | 0.46 | Maker's product page |
| Compliance (Cms) | 0.1176 mm/N | Worked out from the maker's figures |
| Moving mass (Mms) | 0.51 g | Maker's product page |
| Mechanical resistance (Rms) | 1.286 kg/s | Worked out from the maker's figures |
| Force factor (Bl) | 3.1 T·m | Maker's product page |
| Effective piston area (Sd) | 9.6 cm² | Maker's product page |
| Linear excursion (Xmax, one-way) | 0.25 mm | Maker's product page |
| Displacement volume (Vd) | 0.24 cm³ | Worked out from the maker's figures |
| Efficiency bandwidth product (EBP) | 1,000 | Worked out from the maker's figures |
Motor
| Voice coil height | 2 mm | Maker's product page |
|---|---|---|
| Air gap height | 2.5 mm | Maker's product page |
| Magnetic flux density | 1.5 T | Maker's product page |
| Magnet weight | 0.1 kg | Maker's product page |
Mounting
| Overall diameter | 103.8 mm | Maker's datasheet |
|---|---|---|
| Cutout diameter (suggested) | ≈ 71.0 mm | My estimate, from the maker's drawing |
| Mounting depth | 22.5 mm | Maker's datasheet |
| Flange thickness | 5 mm | Maker's datasheet |
| Bolt circle diameter | 92 mm | Maker's datasheet |
| Mounting holes | 6 | Maker's datasheet |
| Mounting hole diameter | 4.2 mm | Maker's datasheet |
| Voice coil diameter | 29 mm | Maker's product page |
| Weight | 0.4 kg | Maker's product page |
Materials
| Cone | TeXtreme | Maker's product page |
|---|---|---|
| Magnet | Neodymium | Maker's product page |
Not on file: Vas. Either the maker doesn't publish it or I haven't found it yet.
What the labels mean
- Maker's product page: copied from the maker's product page.
- Maker's datasheet: read off the maker's own datasheet or drawing.
- Worked out from the maker's figures: Vd = Sd × Xmax, EBP = Fs ÷ Qes.
- My estimate, from the maker's drawing: measured off the maker's drawing, usually within ±0.3 mm (up to ±0.5). The suggested cutout is the basket's width on the drawing plus 1 mm of clearance (1.5 mm on drivers over 200 mm). Measure before you cut.
- NB Audio's listing: how I've filed it in the store.
Check them yourself: SATORI TW29TXN-B Datasheet