← Back to SB Acoustics - 4" PFCR Passive Radiator - SB12PFCR-00
Where the figures for SB12PFCR-00 come from
I take every figure from SB Acoustics' own product page or datasheet where I can. This lists where each figure on the SB12PFCR-00 page came from.
- 12 from SB Acoustics' product page
- 5 from SB Acoustics' datasheet
- 2 my estimate
- 2 from NB Audio's listing
General
| Driver type |
Passive Radiator |
NB Audio's listing |
| Nominal size |
4" |
NB Audio's listing |
Thiele/Small parameters
| Resonant frequency (Fs) |
34 Hz |
Maker's product page |
| Mechanical Q (Qms) |
12.5 |
Maker's product page |
| Equivalent volume (Vas) |
4.2 L |
Maker's product page |
| Compliance (Cms) |
1.2 mm/N |
Maker's product page |
| Moving mass (Mms) |
18.8 g |
Maker's product page |
| Mechanical resistance (Rms) |
0.32 kg/s |
Maker's product page |
| Effective piston area (Sd) |
50 cm² |
Maker's product page |
| Mechanical excursion (Xmech) |
9 mm |
Maker's product page |
Mounting
| Overall diameter |
122 mm |
Maker's datasheet |
| Cutout diameter (suggested) |
≈ 103.0 mm |
My estimate, from the maker's drawing |
| Mounting depth (estimate) |
≈ 28.0 mm |
My estimate, from the maker's drawing |
| Flange thickness |
7 mm |
Maker's datasheet |
| Bolt circle diameter |
111.5 mm |
Maker's datasheet |
| Mounting holes |
4 |
Maker's datasheet |
| Mounting hole diameter |
4.3 mm |
Maker's datasheet |
| Weight |
0.083 kg |
Maker's product page |
Materials
| Cone |
Paper |
Maker's product page |
| Surround |
Rubber |
Maker's product page |
| Basket |
Reinforced Plastic |
Maker's product page |
Not on file: Qts, Xmax, Re, Le, Bl, Sensitivity. Either the maker doesn't publish it or I haven't found it yet.
What the labels mean
- Maker's product page: copied from the maker's product page.
- Maker's datasheet: read off the maker's own datasheet or drawing.
- My estimate, from the maker's drawing: measured off the maker's drawing, usually within ±0.3 mm (up to ±0.5). The suggested cutout is the basket's width on the drawing plus 1 mm of clearance (1.5 mm on drivers over 200 mm). Measure before you cut.
- NB Audio's listing: how I've filed it in the store.
Check them yourself: 4″ SB12PFCR-00 Datasheet