← Back to SB Acoustics - 5" PFCR Passive Radiator - SB13PFCR-00

Where the figures for SB13PFCR-00 come from

I take every figure from SB Acoustics' own product page or datasheet where I can. This lists where each figure on the SB13PFCR-00 page came from.

  • 11 from SB Acoustics' product page
  • 6 from SB Acoustics' datasheet
  • 1 my estimate
  • 2 from NB Audio's listing

General

Driver type Passive Radiator NB Audio's listing
Nominal size 5" NB Audio's listing

Thiele/Small parameters

Resonant frequency (Fs) 23 Hz Maker's product page
Mechanical Q (Qms) 5.9 Maker's product page
Equivalent volume (Vas) 14.2 L Maker's product page
Compliance (Cms) 1.33 mm/N Maker's product page
Moving mass (Mms) 36 g Maker's product page
Mechanical resistance (Rms) 0.88 kg/s Maker's product page
Effective piston area (Sd) 87 cm² Maker's product page
Mechanical excursion (Xmech) 10 mm Maker's product page

Mounting

Overall diameter 150.5 mm Maker's datasheet
Cutout diameter (suggested) ≈ 123.0 mm My estimate, from the maker's drawing
Mounting depth 37.5 mm Maker's datasheet
Flange thickness 5 mm Maker's datasheet
Bolt circle diameter 140 mm Maker's datasheet
Mounting holes 4 Maker's datasheet
Mounting hole diameter 5 mm Maker's datasheet
Weight 0.136 kg Maker's product page

Materials

Cone Paper Maker's product page
Basket Reinforced Plastic Maker's product page

Not on file: Qts, Xmax, Re, Le, Bl, Sensitivity. Either the maker doesn't publish it or I haven't found it yet.

What the labels mean

  • Maker's product page: copied from the maker's product page.
  • Maker's datasheet: read off the maker's own datasheet or drawing.
  • My estimate, from the maker's drawing: measured off the maker's drawing, usually within ±0.3 mm (up to ±0.5). The suggested cutout is the basket's width on the drawing plus 1 mm of clearance (1.5 mm on drivers over 200 mm). Measure before you cut.
  • NB Audio's listing: how I've filed it in the store.

Check them yourself: 5″ SB13PFCR-00 Datasheet