← Back to SB Acoustics - 6.5" CAC Mid-Woofer - SB17CAC35-8
Where the figures for SB17CAC35-8 come from
I take every figure from SB Acoustics' own product page or datasheet where I can. This lists where each figure on the SB17CAC35-8 page came from.
- 26 from SB Acoustics' product page
- 6 from SB Acoustics' datasheet
- 2 worked out from SB Acoustics' figures
- 1 my estimate
- 3 from NB Audio's listing
General
| Driver type | Mid-Woofer | NB Audio's listing |
|---|---|---|
| Nominal size | 6.5" | NB Audio's listing |
| Nominal impedance | 8Ω | Maker's product page |
| Power handling (RMS) | 60 W | Maker's product page |
| Sensitivity | 86.5 dB | Maker's product page |
| Suggested alignment | Either | NB Audio's listing |
Thiele/Small parameters
| Resonant frequency (Fs) | 28 Hz | Maker's product page |
|---|---|---|
| DC resistance (Re) | 5.7 Ω | Maker's product page |
| Voice coil inductance (Le) | 0.15 mH | Maker's product page |
| Mechanical Q (Qms) | 4.46 | Maker's product page |
| Electrical Q (Qes) | 0.4 | Maker's product page |
| Total Q (Qts) | 0.36 | Maker's product page |
| Equivalent volume (Vas) | 42 L | Maker's product page |
| Compliance (Cms) | 2.13 mm/N | Maker's product page |
| Moving mass (Mms) | 15.4 g | Maker's product page |
| Mechanical resistance (Rms) | 0.6 kg/s | Maker's product page |
| Force factor (Bl) | 6.2 T·m | Maker's product page |
| Effective piston area (Sd) | 118 cm² | Maker's product page |
| Linear excursion (Xmax, one-way) | 5.5 mm | Maker's product page |
| Displacement volume (Vd) | 64.9 cm³ | Worked out from the maker's figures |
| Efficiency bandwidth product (EBP) | 70 | Worked out from the maker's figures |
Motor
| Voice coil height | 16 mm | Maker's product page |
|---|---|---|
| Air gap height | 5 mm | Maker's product page |
| Magnetic flux density | 1 T | Maker's product page |
| Magnet weight | 0.54 kg | Maker's product page |
Mounting
| Overall diameter | 171 mm | Maker's datasheet |
|---|---|---|
| Cutout diameter (suggested) | ≈ 145.9 mm | My estimate, from the maker's drawing |
| Mounting depth | 75 mm | Maker's datasheet |
| Flange thickness | 6.5 mm | Maker's datasheet |
| Bolt circle diameter | 159 mm | Maker's datasheet |
| Mounting holes | 4 | Maker's datasheet |
| Mounting hole diameter | 4.3 mm | Maker's datasheet |
| Voice coil diameter | 35.5 mm | Maker's product page |
| Weight | 1.56 kg | Maker's product page |
Materials
| Cone | Ceramic | Maker's product page |
|---|---|---|
| Surround | Rubber | Maker's product page |
| Voice coil former | Fibreglass | Maker's product page |
| Basket | Cast Aluminium | Maker's product page |
What the labels mean
- Maker's product page: copied from the maker's product page.
- Maker's datasheet: read off the maker's own datasheet or drawing.
- Worked out from the maker's figures: Vd = Sd × Xmax, EBP = Fs ÷ Qes.
- My estimate, from the maker's drawing: measured off the maker's drawing, usually within ±0.3 mm (up to ±0.5). The suggested cutout is the basket's width on the drawing plus 1 mm of clearance (1.5 mm on drivers over 200 mm). Measure before you cut.
- NB Audio's listing: how I've filed it in the store.
Check them yourself: 6″ SB17CAC35-8 Datasheet