← Back to Dayton Audio - 1½" DMA Passive Radiator - DMA45-PR
Where the figures for DMA45-PR come from
I take every figure from Dayton Audio's own product page or datasheet where I can. This lists where each figure on the DMA45-PR page came from.
- 10 from Dayton Audio's product page
- 1 from Dayton Audio's datasheet
- 2 my estimate
- 2 not yet checked
- 3 from NB Audio's listing
General
| Driver type |
Passive Radiator |
NB Audio's listing |
| Nominal size |
1.5" |
NB Audio's listing |
| Series |
DMA |
NB Audio's listing |
Thiele/Small parameters
| Resonant frequency (Fs) |
60 Hz |
Maker's product page |
| Mechanical Q (Qms) |
2.75 |
Maker's product page |
| Equivalent volume (Vas) |
0.26 L |
My earlier listing, not yet checked |
| Compliance (Cms) |
2.12 mm/N |
Maker's product page |
| Moving mass (Mms) |
2.8 g |
Maker's product page |
| Mechanical resistance (Rms) |
0.38 kg/s |
Maker's product page |
| Effective piston area (Sd) |
8.6 cm² |
Maker's product page |
| Linear excursion (Xmax, one-way) |
5 mm |
Maker's product page |
| Displacement volume (Vd) |
4.3 cm³ |
My earlier listing, not yet checked |
Mounting
| Faceplate |
Square, 46 × 46 mm |
Maker's datasheet |
| Cutout diameter (suggested) |
≈ 41.0 mm |
My estimate, from the maker's drawing |
| Mounting depth (estimate) |
≈ 33.3 mm |
My estimate, from the maker's drawing |
| Weight |
0.04536 kg |
Maker's product page |
Materials
| Cone |
Aluminium |
Maker's product page |
| Surround |
Rubber |
Maker's product page |
Not on file: Qts, Re, Le, Bl, Sensitivity, Outside diameter, Bolt circle, Flange thickness. Either the maker doesn't publish it or I haven't found it yet.
What the labels mean
- Maker's product page: copied from the maker's product page.
- Maker's datasheet: read off the maker's own datasheet or drawing.
- My estimate, from the maker's drawing: measured off the maker's drawing, usually within ±0.3 mm (up to ±0.5). The suggested cutout is the basket's width on the drawing plus 1 mm of clearance (1.5 mm on drivers over 200 mm). Measure before you cut.
- My earlier listing, not yet checked: from the listing I had before I started checking figures against makers. Treat it as a guide until it's checked.
- NB Audio's listing: how I've filed it in the store.
Check them yourself: Dayton Audio DMA45-PR Specification Sheet