← Back to Dayton Audio - 1000W Plate Amplifier - SPA1000
Where the figures for SPA1000 come from
I take every figure from Dayton Audio's own product page or datasheet where I can. This lists where each figure on the SPA1000 page came from.
- 6 from Dayton Audio's product page
- 16 not yet checked
Power output
| Into 4 Ω |
950 W |
My earlier listing, not yet checked |
| Into 8 Ω |
497 W |
My earlier listing, not yet checked |
| Minimum load |
4 Ω (assumed: Dayton Audio doesn't state one) |
My earlier listing, not yet checked |
| Amplifier channels |
1 |
My earlier listing, not yet checked |
| Amplifier class |
AB |
My earlier listing, not yet checked |
Controls and processing
| Low-pass filter |
30 – 200 Hz |
My earlier listing, not yet checked |
| Phase |
0° or 180° (switch) |
My earlier listing, not yet checked |
| Parametric EQ |
1 band: 18–80 Hz, Q 0.1–1, −14.5 to +6 dB |
Maker's product page |
Inputs and outputs
| Inputs |
RCA line in, L/R (summed to mono); RCA LFE in (bypasses the low-pass) |
My earlier listing, not yet checked |
Size and mounting
| Plate (W × H) |
303.2 × 303.2 mm |
My earlier listing, not yet checked |
| Overall depth |
133.3 mm |
My earlier listing, not yet checked |
| Cutout (W × H) |
254 × 254 mm |
My earlier listing, not yet checked |
| Back |
Sealed |
My earlier listing, not yet checked |
| Weight |
9.75 kg |
My earlier listing, not yet checked |
| Clearance |
Keep 51 mm (2 in) clear of the plate and vents |
Maker's product page |
Power supply
| Mains |
230–240 V AC |
My earlier listing, not yet checked |
| Standby power |
18.4 W at 230 V |
Maker's product page |
Performance
| THD at rated power |
0.92 % |
My earlier listing, not yet checked |
| Signal-to-noise ratio (A-weighted) |
98 dB |
My earlier listing, not yet checked |
| Input impedance |
12 kΩ |
Maker's product page |
| Efficiency |
86 % |
Maker's product page |
| Frequency response |
30 – 200 Hz |
Maker's product page |
Not on file: Fs, Qts, Vas, Sd, Xmax, Re, Le, Bl, Mms, Sensitivity, Outside diameter, Cutout, Mounting depth, Bolt circle, Flange thickness, Weight. Either the maker doesn't publish it or I haven't found it yet.
What the labels mean
- Maker's product page: copied from the maker's product page.
- My earlier listing, not yet checked: from the listing I had before I started checking figures against makers. Treat it as a guide until it's checked.