← Back to Dayton Audio - 250W DSP Plate Amplifier - SPA250DSP
Where the figures for SPA250DSP come from
I take every figure from Dayton Audio's own product page or datasheet where I can. This lists where each figure on the SPA250DSP page came from.
- 3 from Dayton Audio's product page
- 16 not yet checked
Power output
| Into 4 Ω |
250 W |
My earlier listing, not yet checked |
| Minimum load |
4 Ω (assumed: Dayton Audio doesn't state one) |
My earlier listing, not yet checked |
| Amplifier class |
D |
My earlier listing, not yet checked |
Controls and processing
| DSP |
Yes |
My earlier listing, not yet checked |
| DSP functions |
Low-pass, subsonic filter, 5-band PEQ (PC software), 2 PEQ bands on the panel, limiter, high-pass on the line out, delay on the line out |
My earlier listing, not yet checked |
| Low-pass filter |
30 – 125 Hz |
My earlier listing, not yet checked |
| Low-pass slope |
12 or 24 dB/octave, or off |
My earlier listing, not yet checked |
| Subsonic filter |
25 – 40 Hz |
My earlier listing, not yet checked |
| Subsonic slope |
12 or 24 dB/octave, or off |
My earlier listing, not yet checked |
| Phase |
Variable, 0–180° |
My earlier listing, not yet checked |
| Parametric EQ |
5 bands: 10–200 Hz (PC software); 2 on the panel |
Maker's product page |
| High-pass on the line out |
30 – 125 Hz |
Maker's product page |
| Line-out delay |
0 – 10 ms |
Maker's product page |
Inputs and outputs
| Inputs |
RCA line in, L/R (unbalanced); XLR in, L/R (balanced) |
My earlier listing, not yet checked |
Size and mounting
| Plate (W × H) |
184 × 262 mm |
My earlier listing, not yet checked |
| Cutout (W × H) |
158.8 × 234.9 mm |
My earlier listing, not yet checked |
| Weight |
1.1 kg |
My earlier listing, not yet checked |
Power supply
| Mains |
230–240 V AC |
My earlier listing, not yet checked |
Performance
| Signal-to-noise ratio (A-weighted) |
97.9 dB |
My earlier listing, not yet checked |
Not on file: Fs, Qts, Vas, Sd, Xmax, Re, Le, Bl, Mms, Sensitivity, Outside diameter, Cutout, Mounting depth, Bolt circle, Flange thickness, Weight. Either the maker doesn't publish it or I haven't found it yet.
What the labels mean
- Maker's product page: copied from the maker's product page.
- My earlier listing, not yet checked: from the listing I had before I started checking figures against makers. Treat it as a guide until it's checked.