Dayton Audio
Dayton Audio - 250W DSP Plate Amplifier - SPA250DSP
Dayton Audio - 250W DSP Plate Amplifier - SPA250DSP
In stock
Stock status is updated regularly from my distributor. If the full quantity ordered isn’t available, I’ll get in touch.
Couldn't load pickup availability
Description:
The Dayton Audio SPA250DSP digitally processed plate amplifier offers an elite level of control over your entire system (i.e. subwoofer and mains). This unique amplifier allows you to fine tune your systems low-frequency performance, and at the same time high pass to your mains (or satellites) protecting them from damage due to over excursion. DSP functions include: 7 PEQs, LPF, phase, subsonic filter, limiter, mains delay, and HPF. Fast, intuitive PC-based GUI software enables full access to the DSP functions.
Dayton Audio's SPA250DSP true 250 watt digital switching plate amplifier features advanced signal processing control that every audio enthusiast wants. This power and flexibility is accessible via PC-GUI software and the innovative single-knob LCD control panel.
Features:
- DSP functions: 7 PEQs, LPF, phase, subsonic filter, limiter, mains delay, and HPF
- Single-knob control panel with high-contrast LCD display and status LEDs
- Fast, intuitive PC-based GUI software enables full access to the DSP functions
- Efficient Class D output topology ensures high-impact low frequency performance
Specifications:
- 250 watts RMS into 4 ohms, THD+N <0.1%
- Signal to noise ratio: 97.9 dB (A-weighted)
- Amplifier cutout: 235mmx160mm
- Shipping weight: 1.68kg
Specifications
Specifications
Power output
| Into 4 Ω | 250 W |
|---|---|
| Minimum load | 4 Ω (assumed: Dayton Audio doesn't state one) |
| Amplifier class | D |
Controls and processing
| DSP | Yes |
|---|---|
| DSP functions | Low-pass, subsonic filter, 5-band PEQ (PC software), 2 PEQ bands on the panel, limiter, high-pass on the line out, delay on the line out |
| Low-pass filter | 30 – 125 Hz |
| Low-pass slope | 12 or 24 dB/octave, or off |
| Subsonic filter | 25 – 40 Hz |
| Subsonic slope | 12 or 24 dB/octave, or off |
| Phase | Variable, 0–180° |
| Parametric EQ | 5 bands: 10–200 Hz (PC software); 2 on the panel |
| High-pass on the line out | 30 – 125 Hz |
| Line-out delay | 0 – 10 ms |
Inputs and outputs
| Inputs | RCA line in, L/R (unbalanced); XLR in, L/R (balanced) |
|---|
Size and mounting
| Plate (W × H) | 184 × 262 mm |
|---|---|
| Cutout (W × H) | 158.8 × 234.9 mm |
| Weight | 1.1 kg |
Power supply
| Mains | 230–240 V AC |
|---|
Performance
| Signal-to-noise ratio (A-weighted) | 97.9 dB |
|---|
- Power as Dayton Audio rates it (RMS).
Some figures here aren't checked against Dayton Audio's datasheet yet. See which
