← Back to Dayton Audio - 40mm AMT Tweeter - AMTMINI-8
Where the figures for AMTMINI-8 come from
I take every figure from Dayton Audio's own product page or datasheet where I can. This lists where each figure on the AMTMINI-8 page came from.
- 14 from Dayton Audio's product page
- 4 from Dayton Audio's datasheet
- 1 my estimate
- 3 from NB Audio's listing
General
| Driver type |
Tweeter |
NB Audio's listing |
| Nominal size |
1.5" |
NB Audio's listing |
| Nominal impedance |
8Ω |
Maker's product page |
| Series |
AMT |
NB Audio's listing |
| Power handling (RMS) |
15 W |
Maker's product page |
| Power handling (program) |
30 W |
Maker's product page |
| Sensitivity |
88 dB |
Maker's product page |
| Frequency range |
3,500 – 40,000 Hz |
Maker's product page |
Thiele/Small parameters
| DC resistance (Re) |
7.92 Ω |
Maker's product page |
| Mechanical Q (Qms) |
1.86 |
Maker's product page |
| Total Q (Qts) |
1.84 |
Maker's product page |
| Effective piston area (Sd) |
3.8 cm² |
Maker's product page |
Mounting
| Overall diameter |
56 mm |
Maker's datasheet |
| Cutout diameter (suggested) |
≈ 41.5 mm |
My estimate, from the maker's drawing |
| Mounting depth |
23 mm |
Maker's product page |
| Flange thickness |
2 mm |
Maker's datasheet |
| Bolt circle diameter |
49 mm |
Maker's datasheet |
| Mounting holes |
4 |
Maker's product page |
| Mounting hole diameter |
3.2 mm |
Maker's datasheet |
| Weight |
0.05897 kg |
Maker's product page |
Materials
| Cone |
Kapton |
Maker's product page |
| Magnet |
Neodymium |
Maker's product page |
Not on file: Fs, Vas, Xmax, Le, Bl, Mms. Either the maker doesn't publish it or I haven't found it yet.
What the labels mean
- Maker's product page: copied from the maker's product page.
- Maker's datasheet: read off the maker's own datasheet or drawing.
- My estimate, from the maker's drawing: measured off the maker's drawing, usually within ±0.3 mm (up to ±0.5). The suggested cutout is the basket's width on the drawing plus 1 mm of clearance (1.5 mm on drivers over 200 mm). Measure before you cut.
- NB Audio's listing: how I've filed it in the store.
Check them yourself: Dayton Audio AMT Mini-8 Specifications Sheet