← Back to Dayton Audio - 4mm Insulated Speaker Post Pair - BPFI-NI

Where the figures for BPFI-NI come from

I take every figure from Dayton Audio's own product page or datasheet where I can. This lists where each figure on the BPFI-NI page came from.

  • 7 not yet checked

Mounting

Hole per post 11.5 mm, keyed My earlier listing, not yet checked
Key A 2.3 mm rib on the insulating bush, running out to its Ă˜16.3 flange My earlier listing, not yet checked
Designed for Dayton Audio binding post plates, such as the SBPP-BK (posts 30 mm apart), or any cabinet panel with a keyed 11.5 mm hole and 25 mm thread length My earlier listing, not yet checked
Depth behind the mounting face 31.4 mm (computed from the drawing) My earlier listing, not yet checked

Size

Body Ă˜19.2 mm, 25.5 mm above the face My earlier listing, not yet checked
Rear thread 25 mm long My earlier listing, not yet checked
Tabs .250" (6.35 mm) male disconnect My earlier listing, not yet checked

Not on file: Fs, Qts, Vas, Sd, Xmax, Re, Le, Bl, Mms, Sensitivity, Outside diameter, Cutout, Mounting depth, Bolt circle, Flange thickness, Weight. Either the maker doesn't publish it or I haven't found it yet.

What the labels mean

  • My earlier listing, not yet checked: from the listing I had before I started checking figures against makers. Treat it as a guide until it's checked.

Check them yourself: Dayton Audio's datasheet