← Back to NB AUDIO - NPA DSP Plate Amplifiers

Where the figures for NPA250 come from

I take every figure from NB Audio's own product page or datasheet where I can. This lists where each figure on the NPA250 page came from.

  • 1 from NB Audio's product page
  • 25 not yet checked

NPA250

Into 4 Ω 250 W My earlier listing, not yet checked
Into 8 Ω 130 W My earlier listing, not yet checked

NPA250-8

Into 4 Ω 200 W My earlier listing, not yet checked
Into 8 Ω 250 W My earlier listing, not yet checked

NPA500

Into 4 Ω 500 W My earlier listing, not yet checked
Into 8 Ω 270 W My earlier listing, not yet checked

NPA500-8

Into 4 Ω 400 W My earlier listing, not yet checked
Into 8 Ω 500 W My earlier listing, not yet checked

NPA1200-8

Into 4 Ω 1000 W My earlier listing, not yet checked
Into 8 Ω 1200 W My earlier listing, not yet checked

Controls and processing

DSP Yes My earlier listing, not yet checked

Size: NPA250, NPA250-8, NPA500, NPA500-8

Plate (W × H) 216.2 × 216.2 mm My earlier listing, not yet checked
Overall depth 49.9 mm My earlier listing, not yet checked
Cutout (W × H) 192.2 × 192.2 mm My earlier listing, not yet checked
Mounting holes 8 × Ø4.3 mm My earlier listing, not yet checked

Size: NPA1200-8

Plate (W × H) 227.9 × 275 mm My earlier listing, not yet checked
Overall depth 82.6 mm My earlier listing, not yet checked
Cutout (W × H) 203.9 × 251 mm My earlier listing, not yet checked
Mounting holes 10 × Ø4.3 mm My earlier listing, not yet checked

Size and mounting

Plate thickness 2 mm My earlier listing, not yet checked
Plate corner radius 3 mm My earlier listing, not yet checked
Mounting screws None supplied: M4 threaded inserts with M4 button-head bolts recommended (or 8 or 10 gauge screws) My earlier listing, not yet checked
Gap round the plate, flush mounted 0.5 – 0.75 mm My earlier listing, not yet checked
Clearance behind the amp At least 10 mm My earlier listing, not yet checked
Gasket Not included, and generally not needed My earlier listing, not yet checked
Back Not airtight: fit it in its own enclosure, inside or attached to the cabinet Maker's product page

Not on file: Fs, Qts, Vas, Sd, Xmax, Re, Le, Bl, Mms, Sensitivity, Outside diameter, Cutout, Mounting depth, Bolt circle, Flange thickness, Weight. Either the maker doesn't publish it or I haven't found it yet.

What the labels mean

  • Maker's product page: copied from the maker's product page.
  • My earlier listing, not yet checked: from the listing I had before I started checking figures against makers. Treat it as a guide until it's checked.