← Back to SB Acoustics - 4" PAC Passive Radiator - SB12PAC25-00

Where the figures for SB12PAC25-00 come from

I take every figure from SB Acoustics' own product page or datasheet where I can. This lists where each figure on the SB12PAC25-00 page came from.

  • 12 from SB Acoustics' product page
  • 3 from SB Acoustics' datasheet
  • 1 my estimate
  • 2 from NB Audio's listing

General

Driver type Passive Radiator NB Audio's listing
Nominal size 4" NB Audio's listing

Thiele/Small parameters

Resonant frequency (Fs) 33 Hz Maker's product page
Mechanical Q (Qms) 12.4 Maker's product page
Equivalent volume (Vas) 4.3 L Maker's product page
Compliance (Cms) 1.21 mm/N Maker's product page
Moving mass (Mms) 19.2 g Maker's product page
Mechanical resistance (Rms) 0.32 kg/s Maker's product page
Effective piston area (Sd) 50 cm² Maker's product page
Mechanical excursion (Xmech) 9 mm Maker's product page

Mounting

Overall diameter 125 mm Maker's datasheet
Faceplate Not round, 108.9 × 108.9 mm (see the maker's drawing) Maker's datasheet
Cutout diameter (suggested) ≈ 103.0 mm My estimate, from the maker's drawing
Mounting depth 28 mm Maker's datasheet
Weight 0.078 kg Maker's product page

Materials

Cone Aluminium Maker's product page
Surround Rubber Maker's product page
Basket Reinforced Plastic Maker's product page

Not on file: Qts, Xmax, Re, Le, Bl, Sensitivity, Bolt circle, Flange thickness. Either the maker doesn't publish it or I haven't found it yet.

What the labels mean

  • Maker's product page: copied from the maker's product page.
  • Maker's datasheet: read off the maker's own datasheet or drawing.
  • My estimate, from the maker's drawing: measured off the maker's drawing, usually within ±0.3 mm (up to ±0.5). The suggested cutout is the basket's width on the drawing plus 1 mm of clearance (1.5 mm on drivers over 200 mm). Measure before you cut.
  • NB Audio's listing: how I've filed it in the store.

Check them yourself: 4″ SB12PAC-00 Datasheet