← Back to Scan-Speak - 10" Discovery Subwoofer - 26W/4558T00
Where the figures for 26W/4558T00 come from
I take every figure from Scan-Speak's own product page or datasheet where I can. This lists where each figure on the 26W/4558T00 page came from.
- 10 from Scan-Speak's product page
- 32 from Scan-Speak's datasheet
- 2 worked out from Scan-Speak's figures
- 1 my estimate
- 4 from NB Audio's listing
General
| Driver type | Subwoofer | NB Audio's listing |
|---|---|---|
| Nominal size | 10" | NB Audio's listing |
| Nominal impedance | 4Ω | Maker's datasheet |
| Series | Discovery | NB Audio's listing |
| Power handling (RMS) | 150 W | Maker's datasheet |
| Power handling (program) | 350 W | Maker's datasheet |
| Sensitivity | 88 dB | Maker's product page |
| Suggested alignment | Either | NB Audio's listing |
| Frequency range | fs – 1,500 Hz | Maker's datasheet |
Thiele/Small parameters
| Resonant frequency (Fs) | 21 Hz | Maker's product page |
|---|---|---|
| DC resistance (Re) | 2.6 Ω | Maker's product page |
| Minimum impedance (Zmin) | 3.3 Ω | Maker's datasheet |
| Voice coil inductance (Le) | 0.83 mH | Maker's datasheet |
| Mechanical Q (Qms) | 5.56 | Maker's datasheet |
| Electrical Q (Qes) | 0.33 | Maker's datasheet |
| Total Q (Qts) | 0.31 | Maker's product page |
| Equivalent volume (Vas) | 94.9 L | Maker's product page |
| Compliance (Cms) | 0.55 mm/N | Maker's datasheet |
| Moving mass (Mms) | 105 g | Maker's datasheet |
| Mechanical resistance (Rms) | 2.49 kg/s | Maker's datasheet |
| Force factor (Bl) | 10.5 T·m | Maker's product page |
| Effective piston area (Sd) | 352 cm² | Maker's product page |
| Linear excursion (Xmax, one-way) | 12.5 mm | Maker's datasheet |
| Mechanical excursion (Xmech) | 28 mm | Maker's datasheet |
| Displacement volume (Vd) | 440 cm³ | Worked out from the maker's figures |
| Efficiency bandwidth product (EBP) | 63.64 | Worked out from the maker's figures |
| Effective piston diameter (D) | 212 mm | Maker's datasheet |
| Impedance at resonance (Zo) | 46.8 Ω | Maker's datasheet |
Motor
| Voice coil height | 33 mm | Maker's datasheet |
|---|---|---|
| Air gap height | 8 mm | Maker's datasheet |
| Voice coil layers | 4 | Maker's datasheet |
Mounting
| Overall diameter | 269.2 mm | Maker's datasheet |
|---|---|---|
| Cutout diameter (suggested) | ≈ 240.5 mm | My estimate, from the maker's drawing |
| Mounting depth | 135.2 mm | Maker's datasheet |
| Flange thickness | 6.5 mm | Maker's datasheet |
| Bolt circle diameter | 256.7 mm | Maker's datasheet |
| Mounting holes | 8 | Maker's datasheet |
| Mounting hole diameter | 5 mm | Maker's datasheet |
| Volume displaced by driver | 1.35 L | Maker's datasheet |
| Voice coil diameter | 51 mm | Maker's datasheet |
| Weight | 6.2 kg | Maker's datasheet |
Materials
| Cone | Aluminium | Maker's product page |
|---|---|---|
| Basket | Cast Aluminium | Maker's product page |
| Magnet | Ferrite | Maker's product page |
Typical box tunings
| Closed box: box volume | 30 L | Maker's datasheet |
|---|---|---|
| Closed box: corner frequency | 43 Hz | Maker's datasheet |
| Vented box: box volume | 57 L | Maker's datasheet |
| Vented box: box resonance | 25 Hz | Maker's datasheet |
| Vented box: corner frequency | 26 Hz | Maker's datasheet |
What the labels mean
- Maker's product page: copied from the maker's product page.
- Maker's datasheet: read off the maker's own datasheet or drawing.
- Worked out from the maker's figures: Vd = Sd × Xmax, EBP = Fs ÷ Qes.
- My estimate, from the maker's drawing: measured off the maker's drawing, usually within ±0.3 mm (up to ±0.5). The suggested cutout is the basket's width on the drawing plus 1 mm of clearance (1.5 mm on drivers over 200 mm). Measure before you cut.
- NB Audio's listing: how I've filed it in the store.
Check them yourself: Datasheet